Quick Release Lever - 1/4" PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing on both high-performance multi-hulls and monohulls. The fitting is rugged, having an ultimate strength of 2500 lbs. A positive stop is provided to...

Double Jaw Rigging Toggle - 1/4" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins. Please see the attached charts for the exact dimensions.Specifications:Safe working load = 1000 lbs....

Snap Gate Hook - Body Only - 5/16" - 24 Right HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. Specifications:5-16"-24 RH

Snap Gate Hook - Body Only - 5/16" - 24 Left HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. Specifications:5-16"-24 LH

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminate jaw fittings for lower or upper life lines. (1/2" hole). The hole will not accept cast gate hooks. 

Jaw/Jaw Tubular Turnbuckle T ToggleFor those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjustment.Forged silicon bronze bodies with 316 stainless ends offer a great non-galling combination. Integral toggle...

T-Track Stainless Steel Slider 1" x 1/8" LinedSpecifications: Track Size 1" x 1/8" (25 mm x 3 mm) Max. Boat Length-  27 feet (8 m) Max. Boat Weight- 5000 lbs (2270 kg) Max. Sail Area- 315 sq. ft (29 m2) Length- 3" (76 mm)...

Quick Release Shroud Adjuster - 1/4" PinDeveloped for dry-sailed one-design dinghies. When the quick-release pin is pulled, easy adjustment can be obtained. 1/4″ pin.Specifications: Pin-to-pin adjustment: 1-3/4″ to 3-5/8″ Safe working load: 400 lbs.

Rigging Toggle - 1/4" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding clevis pin. All sizes...

Rigging Toggle - 5/16" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding clevis pin. All sizes...

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" RH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line...

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1". 

Splice Eye with Threaded Stud: 5/16"-24 x 2-1/2" RH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line...

Add-A-CleatA versatile cleat easily mounts to a stanchion or rail 7/8" and 1" diameter ( will accommodate larger sizes with longer clamp). Construction consists of a husky Stainless Steel bracket and clamp with a 4-1/2" nylon coated aluminum cleat. Use them for fenders and...

BPG-50 Bulkhead Pipe Gland 50mm ODThe Barton Bulkhead Pipe Gland BPG-50 is for pipes with an outer diameter between 45-50mm (13/4 – 2″). The required hole cutter is 60mm. It has 4 M6 fasteners supplied.These glands give a water and vapor-proof seal between bulkheads....

Spinnaker Pole Slide Car (32mm)Features a heavy-duty stainless steel ring welded to an attachment plate, which is through-bolted to the slide. Generous ring opening to accept most pole ends.Plain bearing genoa cars, sliders, and spinnaker pole slides, plus stand-up blocks.A popular range of Genoa...

4mm Dyneema Loop with High Load Eye - 12mm BoreThe Barton high-load eye with loop is available in three sizes and can be used in various applications on board, including barber hauler, preventers, mast base block tidies, emergency blocks, occasional blocks, and toe rail...

Genoa Slide Car (25mm)Designed with a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks.Plain bearing genoa cars, sliders, and spinnaker pole slides.A popular range of Genoa cars and sliders designed to run on 25mm...

32mm Towable Genoa Car 2:1 Purchase - Heavy DutyBarton Marine introduces its new sleek range of Genoa designed to run on 32mm (1 ¼”) T Track. All are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments....

25mm End Stop Genoa Car Track Barton Marine introduces its sleek range of Genoa Cars designed to run on 25mm (1 ”) T-Track. All GT cars are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A...

32mm Towable Genoa Car 2:1 Purchase - Heavy Duty - BlackBarton Marin's sleek range of Genoa is designed to run on a 32mm (1-1/4”) T Track. All are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments....

25mm T-Track Genoa CarBarton Marine introduces its sleek range of Genoa Cars designed to run on 25mm (1 ”) T-Track. All GT cars are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish...