Symmetric Carbine Hook Without Eye - Length 80mm - 5/16"Features: Grade 316L stainless steel carbine hooks Symmetrical shape without eye                                           Applications:For fastening applicationsSpecifications:...

Symmetric Carbine Hook Without Eye - Length 60mm - 1/4"Features: Grade 316L stainless steel carbine hooks Symmetrical shape without eye                                           Applications:For fastening applicationsSpecifications:...

Symmetric Carbine Hook - Length 100mm - 13/32"Features: Grade 316L stainless steel carbine hooks Symmetrical shape With eye to attach a webbing or a splicing Applications:For fastening applications Specifications: Materials 316L stainless steel grade Length (inch) 3-15/16" Working load (lb) 2640 WLL (lb) 1100 Breaking...

Webbing Snap Hook - 30mm - Length 60mmFeatures: Grade 316L forged webbing snap hook Various applications onboard Outstanding working and breaking loads Modern design Applications:Various uses onboard: canopy installation fastening applications…Specifications: Materials 316L stainless steel grade Length (inch) 2-23/64" Working load (lb) 440 Breaking...

Asymmetric Carbine Hook - Length 60mm - 1/4"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications Integrated on Wichard tethers Specifications: Materials 316L stainless steel grade Length (inch) 2-23/64" Working...

12mm Bolt-Down Fairlead - SingleHarken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear.Specifications: Length (mm): 48 mm...

Quick Cleat - On a Patch for Inflatables - 1/4"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. The perfect solution for securing ropes onto inflatables, featuring a Quick Cleat mounted onto...

Quick Cleat - 5/16" - WhiteThe Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and secures braided lines up to 5/16" (10 mm) with a working load...

Quick Cleat - 1/4" - PairThe Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and secures braided lines up to 1/4" (6 mm) with a working load...

2-3/8" Aluminum SheaveFeatures: Material: Aluminum Max Line 5/8" (16 mm) Max Wire 3/16" (5 mm) Outside Diameter 2-3/8" (60 mm) Inside Diameter 1/2" (13 mm) Width 3/4" (19 mm)

Quick Cleat - Stainless Steel - 3/8"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  The heavy-duty version is made of 316-grade Stainless Steel and is suited for marina use, larger...

13mm Low Beam Track - 2MThis track is extruded from high-grade 6061-T6 aluminum and hard coat-anodized for a hard, long-lasting surface.Specifications: Weight (g): 429 g Weight (oz): 15.1 oz Mounting Hole Spacing (mm): 50 mm Mounting Hole Spacing (in): 1-31/32 in Fasteners (mm): 4...

Swivel Cleat BaseSwivelling cleat unit, 15mm sheaves. Stainless steel arm, small C-Cleat™ & fairlead. Swivel cleat bases permit easy cleating and releasing from any angle.Line load should be limited to: MWL 125kg (275lb), BL 250kg (550lb). Ideal for sheet leads and control lines on...

Micro Cam-Matic Aluminum Cleat Kit with Wire FairleadWire fairleads maintain a low profile while holding the line close to the cleat. Kit includes 468 Cam-Matic® and 475 wire fairlead.Specifications: Weight: 33g / 1.2oz Maximum working load: 91kg / 200lb

Micro Carbo-Cam Base with BullseyeMicro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base.Specifications: Height: 22mm / 7/8in. Weight: 50g / 1.75oz Minimum line: 3mm / 1/8in Maximum line: 6mm / 1/4in Fastener spacing: 27mm / 1-1/16in Fasteners: 4 FH mm /...

Standard Carbo-Cam® CleatHarken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical, or where adjustments are less frequent. Specifications: Height: 30mm / 1-3/16in. Length: 65mm / 2-9/16in. Width: 32mm / 1-1/4in...

Micro Carbo-Cam Cleat Kit with Wire FairleadWire fairleads maintain a low profile while holding the line close to the cleat.Kit includes lightweight, fiber-reinforced 471 Carbo Cam, and 475 wire fairlead.Specifications: Weight: 26g / 0.9oz Maximum working load: 68kg / 150lb

Micro Standard Carbo-Cam Base with BullseyeMicro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base.Specifications: Height: 33mm/1-5/16in Weight: 85g/3oz Minimum line: 3mm / 1/8in Maximum line: 10mm / 3/8in Fastener spacing: 27mm / 1-1/16in Fasteners: 5 FH mm / #10 FH in...

Standard Carbo-Cam® Kit with Wire FairleadWire fairleads maintain a low profile while holding the line close to the cleat. Kit includes lightweight, fiber-reinforced 326 Carbo Cam and 298 wire fairlead.Specifications: Weight: 54g / 2 oz. Maximum working load: 91kg / 200lb.

Anchor Chain Claw-Hook TensionerThe "Claw Hook" design features a shorter overall length. The claw design will grab 1/4", 5/16" and 3/8" chain. The toggled claw enables you to grab the chain quickly and easily. Two 1/4" mounting holes are provided in the base of...

Stanchion Base Single - Heavy-DutyRugged SS Base is canted 5 degrees inboard to match most deck cambers. Features a 5/16" (8mm) welded rod reinforcement which also serves as a bail for snatch blocks and other gear. Specifications: Length 5-1/8" (130 mm) Width 2-3/4" (70 mm)...

Investment Cast Pad Eye - 2-1/2" OD Base316 Stainless Steel includes delrin(tm) base. Order Backing Plate 97-53 separately. Specifications: Eye Width 1" (25 mm) Eye Height 13/16" (21 mm) Eye Stock 3/8" (10 mm) Length 2-1/2" (64 mm) Width 2-1/2" (64 mm) Fasteners (4), 1/4"...

Exit Plate/Flat for up to 3/4" LineSpecifications: Halyard Size 3/4" (19 mm) Mast Stat Opening 3-1/4"x 1" (83 mm x 25 mm) Fasteners (4), #10 RH (5 mm) Weight 1 oz. (28 g)