BPI-32 Bulkhead Pipe Gland Reducer 32mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 28 and 32mm.These glands give a water and vapor-proof seal between bulkheads. They are flexible and will...

Traveller Eye (Pair) Size 0, 16mmFeatures: Size 0 16mm Traveller Eye Pair Recirculating ball bearing dinghy traveller range Complementing Barton’s successful larger traveller range, the dinghy traveller system uses proven recirculating Delrin ball technology and features a 16mm wide track.

Spinnaker Pole Slide Car (32mm)Features a heavy-duty stainless steel ring welded to an attachment plate, which is through-bolted to the slide. Generous ring opening to accept most pole ends.Plain bearing genoa cars, sliders, and spinnaker pole slides, plus stand-up blocks.A popular range of Genoa...

Deck Eye - Stainless Steel - 14mmStainless steel deck eyes with generous eye capacity.Specifications: Stainless Steel Deck Eye Single 14mm Height x 14mm Width x 5mm Fastenings

Deck Organizer Size 1 - 3 SheaveDesigned for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminum construction with a grey or black anodized finish. Sheaves are from molded Acetal with hollow stainless rivets...

29mm Carbo Double Swivel Symmetrical Fishing PulleyDesigned to improve the deployment and retraction responsiveness and the precise presentation of bait teasers aboard sport fishing boats. The unit features two back-to-back 29 mm sheaves, which make it symmetrical and balanced. This is the first fishing...

Tubular Cleat - 6mmThese handy cleats have many uses where light loads are expected.Specifications: Weight: 5g Dimensions: 55mm x 13mm x 14mm Size: 55mm Fastenings: 4mm

Stainless Steel Split Rings - 10mm - 10-PackFeatures: Easy-fit stainless steel split rings for use with our clevis pins Supplied in packs of 10 Specifications: Weight: 3g Dimensions: 30mm x 30mm x 4mm

Single DO 550 Rope Clutch Cruising Racing Max 12mm LineFor cruising and racing yachts, offering a holding power of up to 550 kgs. Modern, high-performance materials. Manufactured from modern lightweight materials, the DO 550 moulded parts are made from high-grade plastics which are strong, light,...

5/16 Stainless Steel Sail Snap +Features: Grade 316L stainless steel forged sail snaps Easy to install (single-handed operation) Efficient use: no jamming of the system Specifications: Materials: 316L stainless steel grade Length (mm): 110 Working load (kg): 960 Breaking load (kg): 1300 Weight (g):...

Deck Plate with Fixing & Eye with Blanking Plug - M12 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric thread sizes – M8, M10, and M12, each supplied...

4mm Rope Stoppers - Black - PairRope Stoppers can also be referred to as parrel beads, tie balls, halyard stoppers, or stopper balls, and are primarily used in rope management.At the end of a line, Rope Stoppers serves as an easy-to-grab end knob, can...

7mm Dyneema Loop with High Load Eye - 22mm BoreThe Barton high-load eye with loop is available in three sizes and can be used in various applications on board, including barber hauler, preventers, mast base block tidies, emergency blocks, occasional blocks, and toe rail...

25mm T-Track Genoa CarBarton Marine introduces its sleek range of Genoa Cars designed to run on 25mm (1 ”) T-Track. All GT cars are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish...

Low Friction Ring Strap Eye - Stainless SteelFor the concerning dinghy sailor. Barton has offered stainless steel deck eyes for a long while, but as performance on boats improves, the desire to reduce friction on deck fixings and turning points of lines becomes more...

High Load Eye 6mm BoreAvailable in six sizes. Manufactured in marine-grade aluminum with a hard anodized finish. These lightweight high-load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, and ast base tidies to stanchion lead eyes. The...

Triple DO 550 Rope ClutchModern, high-performance materials. Manufactured from modern lightweight materials, the DO 550 molded parts are from high-grade plastics that are strong, light, and impact-resistant. Cams and bases are from marine grade aluminum, anodized for long life in the harsh marine environment.True...

Size 5 54mm Plain Bearing Pulley Block Single Block Fixed EyeThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are a rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All...

Size 5 54mm Plain Bearing Pulley Block Single Block SwivelThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components...

'K" Cam MiniManufactured from Dupont Kevlar/Zytal, K Cams are available in 3 sizes to accept lines up to 14mm (9/16”) in diameter. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins.'K' cams are very strong, lightweight, and have excellent wear...

Size 7 70mm Plain Bearing Pulley Block Single SwivelThe size 7 Barton high-load cruising block range is engineered for superior strength and performance and offers both plain and ball-bearing sheave assemblies. The range features high-grade glass fiber nylon reinforced molded side plates with an...

Size 4 58mm Plain Bearing Pulley Upright BlockThe Size 4 Barton range of blocks has a 58mm (2 5/16″) sheave. They are of a rugged construction featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-bearing components...

Size 1 30mm Plain Bearing Pulley Block Single Fixed EyeThe Size 1 Plain Bearing Blocks have a 30mm (1 3/16") sheave. The range is designed with an internal steel frame for added strength and durability. Also available in ball bearing sheave options, the lightweight...