60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with: B60 SS60 Specifications: Type: Tools...

Shaft Mount for LiveScope™ 2 Transducer Series - 0 DegreesPosition your LiveScope 2 and LiveScope 2 HD transducers on a shaft with this mount for forward and down modes while fishing.

0 Degree Pole Mount f/Livescope Plus LVS34Position your LiveScope™ Plus LVS34 transducer on this 0-degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too). Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 6"L WT: 0.47...

4-Pin Transducer to 8-Pin Sonar PortConnect a 4-pin transducer to an 8-pin sonar port on your compatible marine device with this adapter cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or...

DSM30 & DSM300 Transducer Adapter CableThe DSM30/DSM300 Transducer Adapter Cable allows you to utilize Raymarine's wide offering of specialty and high performance in-hull, through-hull or transom mount transducers with our new MFDs with built-in sounder. This adapter is also perfect for occaisions where a...

Adapter cable, 7 pin BLUE to bare wires Specifications: Type: Adapters Box Dimensions: 2"H x 3"W x 7"L WT: 0.2 lbs UPC: 042194535111

Humminbird 9-Pin Mix & Match Chirp Cable - 1MAirmar's Mix & Match Chirp Cable for Humminbird.Features: Length: 1M 9-Pin This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters...

Deadrise Angle Finder - Accuracy of ± 1/2°Accurate to 1/2 of 1°, this precision instrument, with strong ceramic magnet is designed for attachment to a carpenter's square or straight edge to overcome time consuming computation of angles.Features: Quickly measures boat hull deadrise angle. Ball...

117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.For use with: B117 B150 B744V B744VL B765C SS555 Specifications: Type: Tools Box Dimensions:...

15' Extension Cable - 8-PinSI-TEX Extension CableFeatures: 15' 8-Pin Specifications: Type: Extension Box Dimensions: 1"H x 8"W x 8"L WT: 0.5 lbs UPC: 010407330723

10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use brand-specific connectors.Gemeco has introduced a...

75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...

75WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 75WR-2 or 75WR-3 for the hull nut.For use with: B75 SS75 Specifications: Type:...

Transom Mounting Bracket for P66 Transducer - 2004 & upThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 4"W x 4"L WT: 0.21...

Extension Cable with XID - 12-Pin - 30'Extend the cable length of your compatible 12-pin transducer with this 30 foot (9 meter) cable. Supports 12-pin Airmar transducer with XID.WARNING: This product can expose you to chemicals which are known to the State of California...

8-Pin Trnasducer Extension Cable- 10'Connect your transducer to your sonar device with this 10'(3M) 8-pin extension cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information...

HS-WS-SS Mounting KitMounting kit for transom mount 83/200 kHz skimmer transducers Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 4"L WT: 0.1 lbs UPC: 042194504995

10-Pin to 12-Pin Adapter Cable (0.4m) for TZT3Features: 10-Pin to 12-Pin ends Length: 0.4m Used specifically for Furuno's TZT3 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters...

Transducer Spray ShieldGarmin's transducer spray shield is available for Garmin side scanning transducers.Mounting hardware included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to...

Axiom RV Adapter Cable (25-pin to 7-pin)Adaptor Cable (25 pin to 7 pin) to attach an existing 7 pin Airmar (direct connect to ax7/eSx7 MFD) transducer to Axiom RV Specifications: Type: Adapters Box Dimensions: 1"H x 8"W x 12"L WT: 0.4 lbs UPC: 723193817209...

Transducer Adapter Cable f/P72, P79, GT15 & GT30 for echoMAP™ CHIRPConnect a Garmin GT30 transom mount scanning transducer and a Garmin GT15M-IH, Airmar P72 or Airmar P79 in-hull mount traditional transducer to a compatible echoMAP™ CHIRP chartplotter/sonar combo.This adapter cable allows the echoMAP CHIRP...

9-Pin Black to 7-Pin Blue Adapter Cable f/XID TransducersThe 9-to-7-Pin Transducer Adapter enables xSonic 9-pin transducers to connect to legacy 7-pin displays.Use with Airmar Chirp transducers Specifications: Type: Adapters Box Dimensions: 2"H x 4"W x 7"L WT: 0.24 lbs UPC: 9420024165355

Adapter 7-Pin Blue Transducer to a 9-Pin Black UnitFeatures: Connects legacy 7-Pin Blue Transducer to a 9-Pin Black Unit Sonic Connector Transducer Adapter Cable Compatible With: HDS Gen3 Elite-Ti Series NSS evo2 GO XSE Series SonarHub™ Specifications: Type: Adapters Box Dimensions: 2"H x 6"W...